Men's hair system density and the #2 brown-gray color chart
Two specifications decide whether a toupee looks like hair or looks like a toupee: how much hair is on the base, and how much gray is mixed into the color. Everything else, base material, size, cut, matters too, but get these two wrong and no amount of styling saves it.
The usual mistake is ordering the fullest density and the plainest color. Both feel like the safe choice. Both are the reason first-time buyers end up with a piece that sits in a drawer.
LYRICAL HAIR runs nine density levels from 60% Extra Light to 140% Medium, and the #2 brown series comes in seven versions, from solid Darkest Brown up to 60% gray. Here's what each one actually does.

What hair density means
Density is how much hair is tied to the base, and it's the number that controls whether the finished piece reads as thin, average or full. A low-density system has fewer hairs per square inch; a high-density one has more.
The number is not a quality rating. 60% isn't a cheap version of 140%, it's a different product for a different head. A man with fine, light-brown hair who orders 140% gets a density mismatch that no color match will hide, because the eye reads bulk before it reads shade. A man with thick, coarse sides who orders 80% gets a system that looks thinner than his own hair at the temples, which is its own kind of giveaway.
The nine density levels
|
Density |
LYRICAL grade |
|
60% |
Extra Light |
|
70% |
Light |
|
80% |
Light |
|
90% |
Light |
|
100% |
Light to Medium |
|
110% |
Light to Medium |
|
120% |
Medium Light to Medium |
|
130% |
Medium |
|
140% |
Medium |
Read the ceiling first: even the top of this range is labelled Medium. Nothing here is a heavy density, which is deliberate, and it's worth knowing before you assume 140% is "maximum."
60% Extra Light is the one most suppliers don't stock. It exists for men with genuinely fine hair, or for someone in his sixties who wants the system to disappear rather than to add volume. Most customers shouldn't start here, but the ones who need it have nowhere else to go, and that's the point of carrying it.
70% to 90% is the light band, and it's wider than it looks. The gap between 70 and 90 is the difference between "you can see scalp through this in sunlight" and "this is just normal hair." Men with fine natural hair, or anyone who wants a soft, unstyled look, tend to land at 80 or 90.
100% and 110% are the middle of the range and the most commonly ordered. Enough volume to cover a thinning top, not so much that it reads as a helmet. If you're ordering your first system and you have average side hair, this is where to start.
120% suits men whose sides are on the thicker side, or who want a style with some lift at the front. It's also the level where a bad cut starts showing, because there's enough hair to hold a shape and enough to look wrong in the wrong shape.
130% and 140% are the fullest options here, and they're narrower in application than the label suggests. Thick, coarse natural hair. Younger wearers. Styles that are tall and swept back. On a man with average sides, 140% is the single order we'd most often talk someone out of.
Why the range matters
Most suppliers carry three or four densities clustered around the middle. That's fine if your hair is average, and useless if it isn't. The men who struggle most are at the edges: the ones with very fine hair who need 60-70%, and the ones with heavy sides who need 120%+ to keep the proportions believable. Nine levels exists so those two customers aren't stuck choosing between too much and too little.
None of this replaces matching your sides and back. If your sides are thin and fine, the system has to be light or the contrast gives it away. Density is chosen against your own hair, not against a photo of someone else's.
What #2 Darkest Brown is
#2 is a dark brown, nearly black-brown shade. On its own, as a color code, it carries no gray at all.
That's the catch for anyone over forty. A solid block of dark brown next to salt-and-pepper sides is the first thing people notice, and they notice it without being able to name it. Gray in a hair system isn't a cosmetic extra; it's what makes the color believable at the edges, where your own hair shows.
So the #2 series adds gray in fixed proportions. The two digits after the 2 are the gray percentage: #230 is #2 brown with 30% gray, #250 is 50% gray, and so on through the range.
The #2 gray codes
|
Code |
Color |
|
#2 |
#2 Darkest Brown |
|
#210 |
#2 Dark Brown + 10% Gray |
|
#220 |
#2 Dark Brown + 20% Gray |
|
#230 |
#2 Dark Brown + 30% Gray |
|
#240 |
#2 Dark Brown + 40% Gray |
|
#250 |
#2 Dark Brown + 50% Gray |
|
#260 |
#2 Dark Brown + 60% Gray |
Seven codes sounds like a lot of choice, but they fall into three groups, and the groups behave differently.
10% and 20% (#210, #220) are subtle. At ten percent you'd have to look for the gray. At twenty it starts to register in daylight but the overall read is still dark brown. These suit men in their thirties and early forties with a few gray strands, or men who dye and want the system to match the dyed result rather than the natural one.
30% and 40% (#230, #240) are where the blend becomes visible as a blend rather than a tint. This is the practical middle for salt-and-pepper, and #240 in particular is a good starting point for a man with roughly half-gray temples who still thinks of himself as dark-haired.
50% and 60% (#250, #260) are majority gray. At 60, gray is the dominant color and the brown is the undertone. Order these only if your own hair is genuinely that gray; they look wrong against a mostly dark head, and unlike density, color can't be adjusted after the fact.
Density and gray percentage are different numbers
Both are written as percentages, which is where the confusion starts. They measure unrelated things.
|
Specification |
What it controls |
Example |
|
Hair density |
How much hair is on the base |
60% Extra Light |
|
Gray percentage |
How much gray is mixed into the color |
#220, #2 brown + 20% gray |
A system can be light density with 60% gray (fine, gray hair, a common combination for older wearers) or medium density with no gray at all (thick dark hair on a younger man). The two settings don't interact.
How to pick both
Start with density, then color, because density is the harder one to judge from a screen and the one that needs your own head in a mirror.
For density, look at your sides and back, not the thinning area. Average sides and fine hair: 80-100%. Thick sides: 110-120%. Naturally very fine hair, or a preference for a look that doesn't announce itself: 60-70%. If you're between two, take the lower one. Under-density is easier to live with than over-density, and a light system that blends beats a full one that doesn't.
For color, count gray where it's most visible: temples and sideburns, not the crown. Then match the sides, since that's what your system sits next to. Ten to twenty percent if you're lightly graying, thirty to forty for a real salt-and-pepper mix, fifty to sixty if gray is now the main color. Check the shade in daylight rather than under a bathroom bulb, and ask for a physical swatch if the order value justifies it. Screens shift brown badly.
If you're ordering from LYRICAL HAIR, the two specifications to write down are the density percentage and the color code, plus your base size and material. Those four lines are the whole order. Everything after that is fitting and cutting, which a stylist can fix. Density and color, nobody can fix.